Measuring the Window Opening

Take the following measurements for each unit you plan to replace. All you'll need is a tape measure, pad, and paper. We will come out and do all final measurements for accurate ordering.

To Measure Width:

Measure between the jambs at three points: top, middle and bottom of the current window opening. Please provide us with the smallest of these measurements.

Steps:

1. Open both upper & lower sashes (if possible)

2. Measure inside the existing jam from left to right

3. Repeat step 2 in the middle and the top

4. Write down your width!

To Measure Height:

From bottom to top, measure the high point of the sill of your window to the top of the existing window opening at three points: left, middle, and right. Please provide us with the smallest of these measurements.

Steps:

1. Starting on the left, measure upward to the top of the opening

2. Repeat step 1 for the middle and right side

3. Write down your height!

All window measurements are written and recorded width x height

Example: My window is 3 feet wide and 5 feet tall. This is written 36x72